| |
|
|
Click for Larger Image |
| 1. |
Wenco Machinery Corp just installed (Feb 2010) a refurbished 400 Ton Bliss
Model HP2-400-48-48 Straight Side Press with a New CWP SMXSE12H Servo
Feeder, a rebuilt Straightener, & a new 10,000 CWP Reel. This line is
located in New Jersey and was running production two weeks after delivery.
|
|
 |
|
| 2. |
Wenco Machinery Corp. just finished 2/20/09 a 125 Ton Johnson OBI Back
Geared Refurbish. Besides for a mechanical overhaul it also included a New
Cieco Inc Press Control.
|
|
 |
|
| 3. |
Wenco Machinery Corp. just delivered (January 2009) Three New Stamec Presses
(2) OCP35 & (1) OCP45 to our customer located in Long Island, NY. Wenco work
closely with our customer to ensure everything went smoothly from modifying
the press frames & bolster plates to coordinating the trucking, rigging and
performing the start up assistance.
|
|
 |
|
| 4. |
Wenco Machinery Corp just finished a several year project which included 10
New Stamtec Punch Presses, 20 New Servo Feeders, 20 sets of light curtains,
& 20 sets of Die Protection/PLS Units. Wenco not only supply the equipment
but we provided a turn key installation of all the components.
|
|
 |
|
| 5. |
Wenco Machinery Corp just install a New Cieco Automator II Controller with
the following control cards: Press Control, PLS, Tonnage Monitor, & Die
Protection to this horizontal Press. This control is linked to his network
so they can keep track of Production, Fault history, & Efficiency all from
their Desk Top Computer.
|
|
 |
|
| 6. |
Wenco Machinery just installed (March 2008) a New 200 Ton Stamtec Model
S2-200-72-48 SSDC Punch Press, equipped with a new CWP Servo Feed, a rebuild
Raster Reel Straightener Combo, and a new Prab Scrap System. The Prab Scrap
Conveyor protrudes through the outside wall to a motorized chute mounted
above a dumpster. Our local customer received the equipment February 28 and
was running production March 14.
|
|
 |
|
| 7. |
Wenco Machinery just installed a New 100 Ton Greenerd Hydraulic Punch
Press equipped with a Allen Bradley high definition Touch Screen and a
custom Hydraulic Knock Out.
|
|
 |
|
| 8. |
Wenco Machinery Corp recently installed a New 160 Ton Stamtec Straight side Press Model
GTX-160 with a New Cooper-Weymouth Peterson SMXSE-18 Servo Feeder for a local customer.
|
|
 |
|
| 9. |
Wenco Machinery Corp recently rebuilt (2) Minster P2-60 Straightside
Presses with New Minster Servo Feeders for our customer in Argentina.
|
|
 |
|
| 10. |
Wenco Machinery Corp recently refurbished a 60 Ton Bruderer BSTA60HL and
installed new Press controls for a Battery Mfg in Wisconsin
|
|
 |
|
| 11. |
Wenco Machinery Corp recently refurbished a Bruderer Straightener which entailed removing all rolls,
re-chrome rolls, install a new drive & motor for a customer in Iowa.
|
|
 |
|
| 12. |
Wenco Machinery Corp recently refurbished Three 32 Ton Minster Model B1-32 & installed
three high speed servo feeders for a customer in China.
|
|
 |
|
| 13. |
New Stamtec Presses. Wenco has installed over 45 New Stamtec Presses over the last 6 years. So if you are
interested in a new machine we can provide several references along with a plant visit to see one in production.
|
|
 |
|
| 14. |
New Press Control Consoles, we recently sold 10 Automator II Cieco Inc Press Controls to a local customer. This
allowed our customer to keep a date/time of all die protect faults, total hits on each job, log in limitation for
different operators, and many many more great features. This is a state of the art press control.
|
|
 |
